 |
|
 Home
- » Rivet Nuts and Threaded Inserts
|
| |
Rivet Nuts and Threaded Inserts
Overview
*parts are equivalent to AVK rivet nuts*
We offer a complete line of rivet nuts with a variety of features:
splined and non-splined body, large and small flange head, high
strength threads and more. Our rivet nuts will fit all of your requirements
for any application. For more information about the types of rivet
nuts and threaded inserts that we carry in stock, use the links
below.
Navigate this section using the menu below:
|
|
Ribbed "L" Series | Ribbed
"K" Series | Half Hex Body
| Not Ribbed Flat Head | Not
Ribbed Countersunk Head | Threaded Inserts | Plusnut
|
|
 The
ribbed L Rivet Nut Series features
a large flange head configuration with a splined body.
 Learn
More
|
|
Benefits:
- Splined Body The splined body provides increased torque-to-turn
resistance over conventional non-splined inserts.
- Large Flange Provides a large bearing surface which
increases push-out performance.
- Wide Grip Range The range of product within the L series
provides a placing capability in material thickness ranging
from .020" (0,5mm) to 0.312" (7,9mm).
- High-Strength Threads The threads are rolled into the
product creating a work-hardened surface providing high-strength,
load-bearing threads.
- Lead-In Chamfer The lead-in chamfer on the body provides
ease of insertion into the work piece.
|
|
 The
ribbed K Rivet Nut Series features a
low-profile head configuration with a splined body.
Learn
More
|
|
Benefits:
- Splined Body The splined body provides increased
torque-to-turn resistance over conventional non-splined inserts.
- Near-Flush Installation The low-profile head provides
near-flush seating without special hole preparation.
- Wide Grip Range The range of product within the K
series provides a placing capability in material thickness
ranging from .020" (0,5mm) to 0.312" (7,9mm).
- High-Strength Threads The threads are rolled into
the product creating a work-hardened surface providing high-strength,
load-bearing threads.
- Lead-In Chamfer The lead-in chamfer on the body provides
ease of insertion into the work piece.
|
|
 Half
Hex Body Large Flange Thin Wall Rivet Nut Series
Learn
More
HEX Specifications
Material:
Steel 1008/1010
Stainless Steel 302
Aluminum 5056
Finish:
Zinc Plated-Yellow Dichromate per ASTM B633
Fe/Zn 8, Type II
|
|
|
 Flat
Head Rivet Nuts
Available in Steel-Zinc Plated or Aluminum
Learn
More
Rivet Nut (Flat Head) Specification
PART NUMBERING SAMPLE
Example: 5/16-18 with .125 max grip:
RN-51618-125-SF
ADD "SF" FOR STEEL FLAT HEAD OR "AF" FOR ALUMINUM FLAT
HEAD
|
|
Countersunk Rivet Nuts
Available in Steel-Zinc Plated or Aluminum Class 2B Threads
Learn
More
Countersunk RIVET-NUT
PART NUMBERING SAMPLE
Example: 5/16-18 with .16 max grip:
RN-51618-16-SC
ADD "SC" FOR STEEL FLAT HEAD OR "AC" FOR ALUMINUM FLAT
HEAD
|
|
 Threaded
Inserts
Available in Steel or Aluminum
Learn
More
Thread Serts
PART NUMBERING SAMPLE
Example: 6-32 Thread Size in Steel with .0937-.1562
Material Thickness, with hole size .234 and drill
size A
RN632STS
|
|
 Plusnuts
Learn
More
PART NUMBERING SAMPLE
Example: 6-32 Thread Size with Grip Range .020-.150, with hole size .209-.214
S6P150
|
|
Plusnuts Prebulbed
Learn
More
PART NUMBERING SAMPLE
Example: 10-32 Thread Size with Grip Range .020-.175, with hole size .312-.317
S10PB175
|
3 Easy Steps for Installation
|
|
