Jay Cee Sales / Rivets in Stock

Jay-cee Sales & Rivet Inc.
Sitemap | Home | Email
Ask the Rivet Experts
 
 
RivetsRivet Nuts & Threaded InsertslockboltsRiveting ToolsJay-cee Quality StandardsContact Jay-cee salesDownload Line Card

Jay-cee 800-521-6777

RIVET SELECTOR

 

Download Catalog

SUGGESTED SOLID RIVET LENGTHS FOR VARIOUS GRIPS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

SAE Clevis Pins

Clevis Pins Data Sheet

Jay-Cee Sales and Rivet Inc. offers a large selection of SAE clevis pins. For more information, use the table below.

 


Clevis Pins Specifications

Nominal
Size
or Basic
Pin
Diameter		 A B C D E F G H J K L Recom-
mended
Cotter
Pin
Nominal
Size
Shank
Diameter		 Head
Diameter		 Head
Height		 Head
Cham-
fer		 Hole
Diameter		 Point
Diameter		 Pin
Length		 Head to
Center
of Hole		 End to
Center
Ref		 Head to
Edge of
hole Ref		 Point Length
Max Min Max Min Max Min ±0.01 Max Min Max Min Basic Max Min Basic Max Min Max Min
3/16 0.188 0.186 0.181 0.320 0.300 0.070 0.050 0.020 0.088 0.073 0.15 0.14 0.58 0.504 0.484 0.09 0.548 0.520 0.055 0.035 1/16 0.062
1/4 0.250 0.248 0.243 0.380 0.360 0.100 0.080 0.030 0.088 0.073 0.21 0.20 0.77 0.692 0.872 0.09 0.736 0.708 0.055 0.035 1/16 0.062
5/16 0.312 0.311 0.306 0.440 0.420 0.100 0.080 0.030 0.119 0.104 0.26 0.25 0.94 0.832 0.812 0.12 0.892 0.864 0.071 0.049 3/32 0.093
3/8 0.375 0.373 0.368 0.510 0.490 0.130 0.110 0.030 0.119 0.104 0.33 0.32 1.06 0.958 0.938 0.12 1.018 0.990 0.071 0.049 3/32 0.093
7/16 0.438 0.436 0.431 0.570 0.550 0.160 0.140 0.040 0.119 0.104 0.39 0.38 1.19 1.082 1.062 0.12 1.142 1.114 0.071 0.049 3/32 0.093
1/2 0.500 0.496 0.491 0.630 0.610 0.160 0.140 0.040 0.151 0.136 0.44 0.43 1.36 1.223 1.203 0.15 1.298 1.271 0.089 0.063 1/8 0.125
5/8 0.625 0.621 0.616 0.820 0.800 0.210 0.190 0.060 0.151 0.136 0.56 0.55 1.61 1.473 1.453 0.15 1.548 1.521 0.089 0.063 1/8 0.125
3/4 0.750 0.746 0.741 0.940 0.920 0.260 0.240 0.070 0.182 0.167 0.68 0.67 1.91 1.739 1.719 0.18 1.830 1.802 0.110 0.076 5/32 0.156
7/8 0.875 0.871 0.866 1.040 1.020 0.320 0.300 0.090 0.182 0.167 0.80 0.79 2.16 1.989 1.969 0.18 2.080 2.052 0.110 0.076 5/32 0.156
1 1.000 0.996 0.991 1.190 1.170 0.350 0.330 0.100 0.182 0.167 0.93 0.92 2.41 2.239 2.219 0.18 2.330 2.302 0.110 0.076 5/32 0.156

 

    1. Lengths tabulated are intended for use with standard clevises, without spacers.
      Where required, it is recommended that other pin lengths be limited, if possible
      to nominal length increments of 0.06 in.
    2. Basic "J" dimension (distance from centerline of hole to end of pin) is specified
      for calculating hole location from underside of head on pins of lengths not tabulated.
    3. Reference dimension provided for convenience in design layout and is not subject
      to inspection.

Note: Not responsible for errors

in data tables. Please check with

our sales department to confirm specs.

 

 

 


 

Home | Rivets | Rivet Tools | Quality Standard & Data | Contact Us
jay-cee sales and rivet Inc. 

Phone: 800-521-6777    Fax: 248-478-6416
© 2002-2004 copyright Jay-Cee Sales & Rivet Inc. Developed by Miller Media Inc. 248-528-3600